How to use this calculator
- Measure all four walls of a rectangular room. This calculator rounds the number of strips up separately for each wall.
- Read the roll width, roll length and pattern repeat from the product label. Keep metres and centimetres in their labelled fields.
- Enter total trimming for the top and bottom combined. Use zero repeat only for paper with no pattern-match allowance.
- Use the result to discuss quantities with the supplier; order matching batch numbers and check return conditions for unopened rolls.
The calculation
Drop length = height + total trimming. For a straight match, round this length up to a whole pattern repeat. Drops per roll = roll length ÷ drop length, rounded down. Count whole-width drops on each wall separately; rolls = total drops ÷ drops per roll, rounded up.
Worked example
For a 4 × 3 m room with 2.4 m walls, 10 cm trimming and 0.5 × 10 m rolls, each drop is 2.5 m. Four drops fit on a roll. The four walls need 8 + 8 + 6 + 6 = 28 drops, so the estimate is seven rolls. A 53 cm straight repeat increases the cut length to 2.65 m and the estimate to ten rolls.
What the estimate does not cover
For no-match or straight-match paper only. Half-drop, offset-match, murals, sloped ceilings and complex corners need a layout-specific estimate. Doors and windows are deliberately not subtracted: small pieces do not always replace full-height drops. No additional damage/spare roll allowance is included.
Common questions
Why not divide wall area by roll area?
That ignores short leftovers which cannot make a full-height strip. Counting full drops gives a more useful estimate for a room.
Does this handle half-drop patterns?
No. Offset matching changes the cutting sequence and material use. Ask the supplier for a layout-specific quantity.
Method reviewed 17 November 2026. These are planning estimates, not a fitting specification or a guarantee of product coverage.