FLOORS & FINISHES

Flooring pack calculator

Turn room measurements into a shopping list.

Calculate flooring area, an adjustable cutting allowance, whole packs, spare material and optional pack cost. All dimensions are metric.

Your project

Example values are filled in. Replace them with your measurements and product specifications. Enter 0 to omit the price. No currency conversion.

Enter your measurements to calculate the estimate.

How to use this calculator

  1. Measure the floor, excluding spaces that will not receive flooring. Split L-shaped rooms into rectangles and calculate each section.
  2. Choose a cutting allowance for your layout. The 10% example is an assumption, not a manufacturer recommendation.
  3. Copy the square metres per pack from the exact product packaging; do not use the area of one plank.
  4. Enter the optional pack price. Check the rounded pack quantity against the supplier’s layout and fitting requirements.

The calculation

Room area = length × width. Planned coverage = room area × (1 + allowance ÷ 100). Packs = planned coverage ÷ coverage per pack, rounded up. Spare coverage = purchased coverage − room area.

Worked example

A 4 × 3 m room is 12 m². With 10% cutting allowance, plan for 13.2 m². At 2.2 m² per pack, six packs cover 13.2 m². That leaves 1.2 m² above the measured floor area, including the cutting allowance.

What the estimate does not cover

This is an area estimate, not a plank layout optimizer. Offcuts may not be reusable; diagonal and herringbone layouts can need more material. Underlay, edging, thresholds, adhesive and expansion gaps are not calculated. For multiple rooms, combine areas before rounding if the same packs can be shared.

Common questions

Why round up to whole packs?

Most suppliers sell sealed packs. A fraction of a pack does not guarantee enough material, so the calculator always rounds upward.

Is spare coverage all reusable?

No. It includes the chosen cutting allowance and pack rounding; some material will become unusable offcuts.

Method reviewed 17 November 2026. These are planning estimates, not a fitting specification or a guarantee of product coverage.